Truck Articles

Through certain recurring actions, air compressor pumps can transform electricity or gas power into compressed air. For different functions like painting, cleaning, supplying oxygen, generating cold air, and so on, this compressed air is very practical for many Do-It-Yourselfers. Understanding air compressors can be very tough since there are many types available though one good way to start knowing them is through the many air compressor parts. Through these parts and numerous accessories, an air compressor can operate properly and effectively to produce compressed air for different applications.

Since there are many types and parts of an air compressor, we will completely focus on the more typical type which is the reciprocating air compressor. Moreover, this post will go over the main parts only. As the name implies, a reciprocating piston compressor makes use of the continuous back and forth motion of the piston to create compressed air inside the compression chamber. Most of the primary parts on a reciprocating piston compressor are listed next: cylinder head, suction/intake valve, delivery valve, cylinder liner/wall/cooling water jacket, compressor casing, crank case, piston, connecting rod, crank shaft, main bearings, bed plate, foundation, lubricating oil strainer, stage relief valves, intercoolers, after-coolers, suction filter, and various other minor parts like springs, pins, rings, and so on.

For every air compressor model, cylinder heads will differ so some may be in-line while others are V-shaped. The cylinder head has pockets that allows it to hold the intake/suction and delivery valves and air cooling fins or water jacket for cooling water passage. The suction filter for the air intake is one of the major parts of a cylinder head and this will permit filtered air to get into the compressor unit.

Inside the cylinder liner, the cylindrical object that constantly moves up and down is the piston. Creating the major part of the compression chamber, the liner directs and supports the piston. Relying on the type or function, piston rings may or may not be employed to make the system air-tight. The piston is able to move back and forth since it is fastened to the connecting rod which in turn is fixed to the crank shaft.

A motor or an engine is connected to the crankshaft to permit it to move and it is perfectly placed within an lubricating oil-filled crankcase. Frequent friction causes typical wear and tear and the use of bearings and lubricating oil on the crankcase help decrease the friction.

Finally, using the intercoolers or after-coolers, the heat from the condensed air can be transferred to the distributed water. Depending on the design of the compressor, other protection instruments such as relief valves, crankcase relief doors, and a pressure switch may also be used.

By the way, it is essential to know which brand and model to look for, when looking for air compressor parts. One can simply find the Ingersoll Rand Air Compressor Parts through different online and offline shops. Leading hardware stores may also carry big brands, like Devilbiss, Porter Cable, Campbell Hausfeld, Craftsman, and Husky to name a few, in their stocks, apart from Rand Air Compressor Parts. Used air compressor parts, which are relatively cheaper, may even be found in some merchants.

Do you currently have troubles understanding air compressors, particularly the reciprocating air compressor? Well, no problem! This post incorporates several useful data concerning the important sections of a reciprocating air compressor, which you must understand before you step out and buy one.

For more facts on air compressor parts accessories do not forget to go to BuyAirCompressorPumps.com

Apr102011

Tags: air compressor parts accessories, air compressor parts craftsman air compressor parts, husky air compressor parts, Trucks

Trackback URI | Comments RSS